Ultraflux Uf 841, User Manual

Page: 60 / 105

60
NT UF 841 CP GB (d) / June 2015
5.6.3 "Advanced settings" menu
1) Simulation mode
The flow meter can be used:
•
in Measurement mode (normal operation of the flow meter),
•
in Flow simulation mode.
Enter the value of the flow required and the sine wave (as a percentage) applied around this value.
Comment: A modulation of 0% keeps the flow velocity constant. A modulation of 100% fluctuates the
simulated flow between 0 and 2 times the indicated value.
2) Special probes
It may be necessary in certain cases to define a probe which is not referenced in the list of Ultraflux probes.
Before using this option, you are strongly recommended to contact Ultraflux.
To use probes other than those of Ultraflux, use the "special probes" function.
T0 represents the dead time of the probe.
F represents the frequency of the probe.
Angle relates to the angle of the ultrasound probe. For an open channel
probe, the angle is always 0.
Text is used to identify the special probe in the list of references of
accessible probes.
3) US & TRT processing
These settings allow the Ultraflux teams to adapt the operation of the flow meter to a specific case. You
must consult us before any modification of these settings.
5.6.4 "Firmware update" menu
This option is used to update the flow meter without needing to dismount it. Consult us prior to using this
option.