QUICK REFERENCE GUIDE
QUICK REFERENCE GUIDE
Use this section for a quick reference for an overview of the operational features
of the D3206 Multizone Controller. For customizing features, please refer to the
Programming/Operation section of the manual.
CALL SCENE:
Used to choose which of the 32 programmed scenes are to be
called or activated.
•
Press a SCENE button
(refer to Figure 4)
to call or activate a programmed
scene.
ADJUST ZONE LIGHT LEVEL:
Used to increase or decrease the
percentage of light level for selected zones.
•
Press the Zone Dim/Bright buttons to increase or decrease the percentage
of light level
for individual zones
(refer to Figure 4)
.
•
Press the Dim Scene buttons to increase or decrease the percentage of
light level
for all zones
(refer to Figure 4)
.
CHANGE SCENE BANK:
Use to choose which of the 32 programmed
scenes can be accessed and which SCENE buttons will control those scenes
(01-08, 09-16...25-32).
•
Press the Function button
(refer to Figure 4)
to toggle though the Scene
Banks (01-08, 09-16...25-32) and then press a SCENE button to activate
that bank.
PROGRAMMING SCENE:
Used to program to desired scenes.
•
Press and hold down a SCENE button of the scene to be progammed for
approximately 8 seconds until scene button blinks to access program
mode.
•
Press the Dim/Bright buttons to turn lighting loads ON, OFF, or adjust
percentage of lighting level to desired level
(refer to Figure 4)
.
•
Press SCENE button again to set scene.
•
Repeat steps for additional scenes.
NOTE:
For Name and Fade Rate programming, refer to program and operation
of the Scene Wizard.
5
DI-000-D3206-00B
11/6/03, 10:59 AM
7
