PROGRAMMING
Control Buttons (refer to Figure 4):
With the cover closed, you can access the
SCENE PROGRAMMING/RECALL
,
MAX
, and
OFF
buttons. With the cover open, you can access the
LCD Display
,
the
Wizard/Menus
,
Select/Next
,
Cancel/Previous
,
Page Zones
,
Dim Scene,
Dim/Bright
,
Zone Info
, and
Function/Shortcut
buttons.
SCENES:
Selects a new scene to fade in. Named scenes will appear
in the display (LCD) when the button is pressed (i.e.,
Breakfast, Lunch, or Dinner).
MAX:
Turns all Loads to maximum BRIGHT.
OFF:
Turns all Loads OFF (opens the air-gap relay).
Wizard/Menus:
Toggles between Main Screen on LCD and several
programming screens
(refer to Programming section)
.
Select/Next:
Advances programming steps.
Cancel/Previous:
Returns to previously selected screen.
Page Zones:
Toggles between local zones on current panel to remote
zones on a remote panel.
Dim Scene:
One touch control for dimming or brightening of set scene.
Dim/Bright:
Allows for manual control of light level for selected zone.
Zone Info:
Displays active Panel, Zone, Group, and Light Level
information.
Used to change Scene Banks.
Used to navigate through programming.
NOTE:
The SCENE, MAX, and OFF buttons will act on a particular group. In the
Basic application this will not make a difference. However, in Advanced
applications you must ensure that programming of the scene bank is the same
as the zone group.
PROGRAMMING AND OPERATION
14
A
B
DI-000-D3206-00B
11/6/03, 10:59 AM
16
