Exclude Zones –
Used to remove a particular zone or zones from
executing in a programmed scene. Proceed as follows:
1.
Press the
Wizards
button and then the
Up or Down
button (if necessary) to select the SCENE WIZARD.
Press the
Select/Next
button to access the SCENE
WIZARD.
2.
Press the
Up or Down
button to select the Exclude
Zones screen.
3.
Press the
Select/Next
button to access the Exclude
Zones screen.
4.
Press the
Up or Down
button to select the desired scene to where you
want to exclude zones from (01-32). Press the
Select/Next
button to
save entry and proceed.
5.
Press the
Up or Down
and
Left or Right
button to
set the desired zone to Exclude. Press the
Select/
Next
button to save entry and proceed.
6.
Press the
Select/Next
button to Exclude zone.
7.
Repeat Step 5 and 6 to exclude additional zones or
press the Cancel/Previous button to proceed and return to the Main
Screen.
ZONE WIZARD –
The ZONE WIZARD programming provides settings for
minimal levels and the option to lock and unlock individual zones. Proceed as
follows:
Adjust Minimum –
Used to program the minimum lighting levels for specific
Loads. Proceed as follows:
1.
Press the
Wizards
button and then the
Up or Down
button to select the Zone Wizard. Press the
Select/
Next
button to access the Zone Wizard.
2.
Press the
Select/Next
button to access the Adjust
Min Level screen.
3. For Dimmers Only
, press the
Up or Down
buttons
or the Dim/Bright buttons to set the individual zone
minimum light levels.
NOTE:
DO NOT use the Dim Scene buttons to make this adjustment.
4.
Press the
Select/Next
button to save entry and
proceed.
5.
Press the
Select/Next
button to return the ZONE
WIZARD screen.
PROGRAMMING AND OPERATION
A
25
A
Use , v or SEL
<SCENE WIZARD>
V
Use , v or SEL
> Exclude Zones
V
Select scene: 01
SCENE 1
PANEL:01 ZONE:1
ZONE# 01-1
Press SEL
to Exclude Zone
Use , v or SEL
<ZONE WIZARD>
V
Use , v or SEL
>Adjust Minimum
V
Adjust Zones'
Minimum Levels
Minimum Adjusted
Press SEL
DI-000-D3206-00B
11/6/03, 11:00 AM
27
