7.
Carefully position all wires to provide room in wall box for Multizone
Controller. Mount Controller to raised cover using the screws provided
(refer
to Figure 1)
.
8.
Restore power at circuit breaker or fuse.
9.
Check for power to the Multizone
Controller by verifying that the GREEN
LCD on the front of the unit is displaying the Dimensions D3200 main
screen.
10.
If necessary, increase or decrease the contrast of the display first, remove
the overlay by gently lifting and releasing the tabs. Then, use a small Philips
style screwdriver to slightly turn the adjustment until preferred contrast is
achieved. To replace overlay, carefully insert lower tabs into front slots of
frame and then bow overlay so that top tab slips into top slot
(refer to
Figure 1)
.
10.
Reinstall the Front Door Frame assembly by aligning with unit. Carefully
press the frame onto unit until it snaps into position. Press all edges to
ensure that it is fully seated.
11. INSTALLATION IS COMPLETE.
INSTALLATION INSTRUCTIONS
9
DI-000-D3206-00B
11/6/03, 10:59 AM
11
