µ-Dimension D3206 User Manual Download Page 23

Page: 23 / 48

Info –

Displays version of software, measures zero cross circuitry in

microseconds, and temperature of sides of device.

29.

Press the

Up or Down

button to select the Info screen.

Press the

Select/Next

button to save entry and proceed.

30.

The software version will be displayed. Press the

Select/Next

button to save entry and proceed.

31.

The top line displayed is the zero crossing in micro
seconds. The bottom line displays the temperature
of the right side in Celsius (R=xxx C) and left side
(L=xxx C).

32.

Press the

Select/Next

button to save entry and return to the Setup

Wizard.

CLOCK WIZARD –

Accessing and properly selecting the settings in this

section is the next step in using this device. It provides basic Time and
Daylight Savings settings. Proceed as follows:

NOTE:

If multiple Multizone Controllers are installed on the LCnet, all units will

synchronize when settings are stored from the Multizone Controller being
programmed.

Press the

Wizards

button and then the

Up or Down

button to select the CLOCK WIZARD. Press the

Select/Next

button to access the CLOCK WIZARD .

Press the

Select/Next

button to access the Set

Date-Time screen.

Press the

Select/Next

button to access the Adjust

Time screen.

Enter the time by pressing the

Up or Down and

Left or Right

buttons. Press the

Select/Next

button to save entry and

proceed.

Enter the date by pressing the

Up or Down and

Left or Right

buttons. Press the

Select/Next

button to

save entry and proceed.

NOTE:

Date will display in format as previously programmed in Setup

Wizard.

For Daylight Savings, press the

Up or Down

buttons

to toggle between ON and OFF. Set to ON position if
Daylight Savings is observed in your area. Set to the OFF position to
disable setting. Press the

Select/Next

button to save entry and proceed.

Press the

Up or Down

button to select the desired Daylight Savings Rule

(United States or European Union). Press the

Select/Next

button to complete

the CLOCK WIZARD programming and return to the Main Screen.

PROGRAMMING AND OPERATION

Use , v or SEL

<CLOCK WIZARD>

Use , v or SEL
> Set Date-Time

Adjust Time:
12:00:00 AM

Adjust Date:
01/01/02 Tu

Daylight Saving
Auto adjust<ON>

Dimensions D3206
Version 1.6.00

Period=16649 us
L=061 C R=069 C

Use , v or SEL
> Info

DI-000-D3206-00B

11/6/03, 10:59 AM

Summary of Contents for D3206

















































Search results

Summary of Contents for D3206

Reviews:

Related manuals for D3206

Brands by name

Popular brands

µ-Dimension D3206, User Manual

Search results

Summary of Contents for D3206

Reviews:

Related manuals for D3206

Brands by name

Popular brands