µ-Dimension D3206, User Manual

Page: 31 / 48

PROGRAMMING AND OPERATION
Location Setup –
The Multizone Controller will calculate the dawn/dusk
times based on the Latitude/Longitude selected.
20. Press the Select/Next button to access the TIMER
WIZARD.
21. Press the Up or Down buttons to select the
Location Setup screen.
22. Press the Select/Next button to access the
Location Setup menu.
23. Press the Up or Down buttons to select the
desired Time Zone. Press the Select/Next button
to save entry and proceed.
24. Press the Up or Down buttons to select the
appropriate Longitude for your location (refer to
the Appendix–to find appropriate settings for
your location–and the Longitude/Latitude Chart)
.
25. Press the Up or Down buttons to select the
appropriate Latitude for your location refer to the
Appendix–to find appropriate settings for your
location–and the Longitude/Latitude Chart)
.
26. Location Setup is now Finished.
Timer Status –
Allows for the Enabling, Disabling, or Deletion of all set
Timers.
27. Press the Select/Next button to access the TIMER
WIZARD.
28. Press the Up or Down buttons to select the Timer
Status screen.
29. Press the Select/Next button to access the Timer
Status menu.
30. Press the Up or Down buttons to select the
desired Timer Status (All Enable, All Disable, or All
Delete). Press the
Select/Next button to save
entry and proceed.
31. Timer Status setup is now Finished.
Next Time Event –
Displays the next event of the day, if programmed.
32. Press the Select/Next button to access the TIMER
WIZARD.
Use , v or SEL
<TIMER WIZARD>
V
Select Time Zone
<EASTERN Stndrd>
Use , v or SEL
>Location Setup
V
Enter Longitude
West> 000 Deg
Enter Latitude
North> 000 Deg
Location Setup
Finished!
Use , v or SEL
<TIMER WIZARD>
V
Use , v or SEL
> Timers Status
V
Select Status
<All Delete>
Are you sure ?
SEL to confirm
Use , v or SEL
<TIMER WIZARD>
V
29
DI-000-D3206-00B 11/6/03, 11:00 AM 31