µ-Dimension D3206 User Manual Download Page 29

Page: 29 / 48

3B.To Modify an existing Timer:

Press the

Select/

Next

button to access the programmed Timer

screen. Press the

Down

button to scroll through the

existing Timers. Press the

Select/Next

button to select the desired Timer

to modify. Proceed as follows:

Press the

Up or Down

and

Left or Right

buttons to

Edit Timer Name (i.e., Porch Light). Press the

Select/Next

button to save entry and proceed.

5A.

Press the

Up or Down

buttons to select the desired

Timer Type (Daily, WeekDays, Weekends, Holidays,
Weekly)

Press the

Select/Next

button to save entry

and proceed.

NOTE:

If Weekly is selected, you must select the desired day of the week

and proceed to

Step 5B

. All other selections, proceed to

Step 6A

NOTE:

Weekly

= Sunday through Saturday individually

Weekdays

= Monday through Friday, inclusive

Daily

= Everyday

5B.

Press the

Up or Down

buttons to select the desired

Day of Week (Sunday-Saturday, Holiday. Press the

Select/Next

button to save entry and proceed.

6A.

Press the

Up or Down

buttons to select the desired

Time Type (Time of Day, Dawn–offset, Dawn+offset,
Dusk–offset, Dusk+offset).

The Offset setting is

used to add (+) or subtract (-) an entered time based
on the dawn/dusk calculated from the Controller. Press the

Select/Next

button to save entry and proceed.

NOTE:

If Time of Day is selected, you must select the desired time and

proceed to

Step 6B

If any other time is selected, press the

Select/Next

button and proceed to

Step 6C

to set Offset time.

6B.

Press the

Up or Down

and

Left or Right

buttons to

set the New Timer’s time (i.e., 01:00 AM). Press the

Select/Next

button to save entry and proceed.

6C.

Press the

Up or Down

and

Left or Right

buttons to

select the desired Offset time (i.e., -02:00)

Press

the

Select/Next

button to save entry and proceed.

Press the

Up or Down

buttons to select the desired

Action (SCENE 01-32, MAX, OFF, Auto OFF Start,
and Auto Stop OFF, where applicable).

Press the

Select/Next

button to save entry and proceed.

NEW TIMER
T:01 DW:SMTWTFSH

Edit Name:
New Timer

Sel Timer Type
<Daily>

PROGRAMMING AND OPERATION

Select Day of
Week: <Sunday>

Select Time Type
<Dusk-offset>

New Timer
T:01 12:00 AM

New Timer
T:01 -2:00 PM

Select Action
<SCENE 01>

DI-000-D3206-00B

11/6/03, 11:00 AM

Summary of Contents for D3206

















































Search results

Summary of Contents for D3206

Reviews:

Related manuals for D3206

Brands by name

Popular brands

µ-Dimension D3206, User Manual

Search results

Summary of Contents for D3206

Reviews:

Related manuals for D3206

Brands by name

Popular brands