Record & Disk Management
SMT User Manual
57
Go to ―Edit Schedules‖ interface and then click
to edit the schedule. The settings of
―Edit Schedule‖ are similar to that of the ―Add Schedule‖. Click
to delete the schedule.
10.4 Record Mode
10.4.1 Manual Recording
Method One
: Click
on the tool bar at the bottom of the live preview interface to enable
recording of the camera.
Method Two
: Go to live preview interface and then click the right-click menu ―Manually
Record On‖ in the camera window or click
on the tool bar under the camera window to
start recording.
10.4.2 Timing Recording
Timing Recording
: the system will record automatically according to the schedule.
Set the timing record schedule of each camera. See 10.3 Schedule Settings for details.
10.4.3 Motion Based Recording
Motion Based Recording
: the system will start motion based recording when the motion
object appears in the setup schedule. The setup steps are as follows:
①
Set the motion based recording schedule of each camera. See 10.3 Schedule Settings for
details.
②
Enable the motion and set the motion area of each camera. See 12.4.1 Motion
Configuration for details.
The camera will start motion based recording once you finish the above settings.
10.4.4 Sensor Based Recording
①
Set the sensor based recording schedule of each camera. See 10.3 Schedule Settings for
details.
②
Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure
the ―Record‖. See 12.3 Sensor Alarm for details.
10.4.5 Intelligence Recording
①
Set the intelligence recording schedule of each IP camera. See 10.3 Schedule Settings for
details.
②
Enable and set the intelligence detection (over temperature, non-mask detection, etc.) See
12 AI/Event Managementfor details.
Note: Click Start
Settings
Record
Mode Settings and then set the manual record time in the
interface. Click “Apply” to save the settings.
Summary of Contents for Smart Management Terminal
Page 93: ...AI Event Management SMT User Manual 85...
Page 129: ...FAQ SMT User Manual 121 Fig 11 1 Fig 11 2...
Page 137: ......