TVT Digital Smart Management Terminal Page 16 User Manual Download

Page: 16 / 137

Introduction

SMT User Manual

No.

Name

Descriptions

microphone, pickup, etc.

AUDIO OUT

Audio output; connect to sound box

1.5 Connections



Video Connections

Video Output: Supports VGA/HDMI video output. You can connect to monitor through these
video output interfaces simultaneously or independently.



Audio Connections

Audio Input: Connect to microphone, pickup, etc.
Audio Output: Connect to headphone, sound box or other audio output devices.



Alarm Connections

Some models may not support this function. Take 8CH alarm inputs and 4CH alarm output for
example.

Alarm Input:
Alarm IN 1~8 are 8 CH alarm input interfaces. There are no type requirements for sensors. NO
type and NC type are both available.
The way to connect sensor and the device is as shown below:

The alarm input is an open/closed relay. If the input is not an open/closed relay, please refer to
the following connection diagram:

Summary of Contents for Smart Management Terminal










































































































































Search results

Summary of Contents for Smart Management Terminal

Reviews:

Related manuals for Smart Management Terminal

Brands by name

Popular brands

TVT Digital Smart Management Terminal, User Manual

Search results

Summary of Contents for Smart Management Terminal

Reviews:

Related manuals for Smart Management Terminal

Brands by name

Popular brands