TVT Digital Smart Management Terminal, User Manual, Page: 84 / 137

AI/Event Management SMT User Manual
76
12 AI/Event Management
12.1 Body Temperature Settings
Click Start

Settings

AI/Event

Temperature/Mask to go to the following interface.
①
Enable the temperature detection for temperature measurement devices.
②
Please select Celsius or Fahrenheit temperature as needed.
③
Enable ―Over Temp‖ and set the temperature threshold. If the body temperature measured
exceeds this threshold, it will trigger alarm. Over temperature will be shown on the captured
face picture and the alarm information will be shown under the real-time warning tab of the
live display interface.
④
Alarm linkage settings. Enable ―Trigger settings‖ and then select the schedule. Click
―Schedule Management‖ to set the schedule.
Select ―APP Push‖, ―Pop-up Message Box‖ and ―Alarm-out‖ as needed.
APP Push: check it and choose ON or OFF. If it is ON, the alarm information will be sent to
the mobile APP.
Alarm-out : check it and then the ―Trigger Alarm-out‖ window will pop up automatically.
Configure the trigger alarm-out in the window. The system will trigger the alarm-out
automatically when the over temperature alarm is triggered. You need to set the delay time and