TVT Digital Smart Management Terminal, User Manual

Page: 42 / 137

Live View Introduction SMT User Manual
34
: Click to view three-screen corridor pattern.
5.2 Preview Image Configuration
5.2.1 OSD Settings
Click Start

Settings

Camera

Image

OSD Settings to go to the interface as shown below.
Select the camera, enter the camera name (or double click the camera name in the camera list to
change the camera name), enable or disable the name and time OSDs (if enabled, drag the red
name and time OSDs directly in the image view area to change the OSDs’ display position) and
select the date and time formats. Click ―Apply‖ to save the settings.
5.2.2 Image Settings
Click Start

Settings

Camera

Image

Image Settings to go to the following interface.
Select the camera and then set the brightness, contrast, saturation and hue of the camera. Click
the ―Advanced‖ button or in the camera list on the right side of the interface to pop up the
―Image Adjust‖ interface and then set the relevant setting items. Please refer to 5.2.3 Image
Adjustment for detailed introductions of these items.
You can click ―Default‖ to restore the image settings to the default factory settings.