TSE DPT60, Owner'S Manual

Page: 89 / 459

Fuels, Lubricants, and Coolants
ZE59858,0000008 -19-05MAR14-1/1
DX,LUBMIX -19-18MAR96-1/1
Diesel Engine Oil and Filter Service Intervals
The oil and filter service intervals in the following table
should be used as guidelines. Actual service intervals
also depend on operation and maintenance practices. It
is suggested to use oil analysis to determine the actual
useful life of the oil and to aid in selection of the proper oil
and filter service interval. Change the oil and filter at least
once every 12 months even if the hours of operation are
fewer than the otherwise recommended service interval.
Oil and filter service intervals are based on a combination
of oil pan capacity and the type of engine oil and filter used.
Diesel fuel sulfur level will affect engine oil and filter
service intervals.
Use of diesel fuel with sulfur content less than 0.0015%
(or 15 ppm) (or 15 mg/kg) maximum limit is required.
IMPORTANT: To avoid engine damage:
•
Reduce oil and filter service intervals by 50%
when using biodiesel blends greater than B20.
Oil analysis may allow longer service intervals.
•
Use only approved oil types.
Approved Oil Types
•
John Deere Plus-50™ II
•
“Other Oils” include oils meeting API CJ-4, ACEA E9,
or ACEA E6.
Use of other specification oils in Final Tier 4/Stage IV
engines can result in premature failure.
NOTE: The 500 hour extended oil and filter change interval
is only allowed if all the following conditions are met:
•
Engine equipped with an extended drain
interval oil pan
•
Use of diesel fuel with sulfur content less than
0.0015% (15 ppm) (15 mg/kg) maximum limit
•
Use of John Deere Plus-50™ II oil
•
Use of an approved John Deere oil filter
Oil Pan Option Codes
Power
Rating Fuel Sulfur
Content
1903
19BB
19AE
19BC 1923
19BA
1976
19AZ
19GK
kW (hp) Other Oils
John Deere
Plus-50 II
Other Oils
John Deere
Plus-50 II
Other Oils
John Deere
Plus-50 II
Other Oils
John Deere
Plus-50 II
63 (85) ≤15 ppm 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours
74 (100) ≤15 ppm 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours
86 (115) ≤15 ppm 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours
93 (125) ≤15 ppm 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours
100 (135) ≤15 ppm 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours
104 (140) ≤15 ppm 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours
129 (173) ≤15 ppm 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours 250 hours 500 hours
Plus-50 is a trademark of Deere & Company
Mixing of Lubricants
In general, avoid mixing different brands or types of oil.
Oil manufacturers blend additives in their oils to meet
certain specifications and performance requirements.
Mixing different oils can interfere with the proper
functioning of these additives and degrade lubricant
performance.
Consult your John Deere dealer to obtain specific
information and recommendations.
10-11 032015
PN=42