TSE DPT60, Owner'S Manual

Page: 14 / 459

SECTION I
GENERAL DESCRIPTION
DPT60 PULLER / TENSIONER
GENERAL
The DPT60 is a Trailer mounted combination Puller/Tensioner used for both overhead
and underground conductor installation. The unit has infinitely variable Linespeed and
Linepull control from ZERO to the MAXIMUM performance of the machine.
The machine is a trailer-mounted unit, which incorporates the TIMBERLAND Quick-
Change Reel Shaft System.
A drive pin, which is located on the drive sprocket, transmits the Reel torque between
the drive to the Reel Shaft. An adjustable combination lifting lug/locking collar prevents
any lateral movement of the reel on the reel shaft. Another lifting lug is attached to the
drive arm, allowing reels to be loaded by crane.
WARNING / CAUTION
WHEN THIS SIGN APPEARS ON THESE PAGES, IT INDICATES WHERE
SPECIAL ATTENTION SHOULD BE PAID TO THE INSTRUCTIONS GIVEN;
PERSONAL INJURY OR DAMAGE TO THE EQUIPMENT MAY OCCUR IF THE
INSTRUCTIONS ARE NOT FOLLOWED.
SPECIFICATIONS
1. Overall Dimensions/Weight
Length: 215 inch
Width: 93 inch
Height: 113 inch (Top of Screen)
Weight (Basic unit):
2. Performance
Maximum Rated Continuous Torque 180,000 in. lbs.
Line speed (@24” Drum Radius) Maximum 4.0 MPH
Maximum Rated Line Pull 6,000 lbs.
NOTE: THESE PERFORMANCE SPECIFICATIONS ARE MAXIMUM AND
MUST NOT BE EXCEEDED.