TSE DPT60, Owner'S Manual

Page: 2 / 459

C O N D U C T O R H A N D L I N G E Q U I P M E N T
5301 Shreveport-Blanchard Hwy
Shreveport, Louisiana 71107
Toll Free: 800.825.2402
Telephone: 318.929.2368
FAX: 318.929.4853
www.tse-international.com
1
At TSE, engineering is a process of continuous product improvement; therefore, specifications are subject to change without notice.
DPT-60 AND DPT-70
DRUM PULLERS
SPECIFICATIONS
The DPT-60 and DPT-70 are heavy duty drum pullers
designed for light transmission stringing. The reel drive
incorporates the latest in hydrostatic transmissions
that allow the operator to infinitely vary the linespeed
and linepull for safe, positive control during the pulling
operation. The maximum desired linepull can be preset
prior to pulling so that the reel drive will stall if a restriction
to the line occurs avoiding damage to the conductor,
towers and hardware. In the tensioning mode, the
hydraulic system permits the line to be pulled at a steady
and controlled tension with automatic pull back to keep
the conductor suspended if the pulling force is reduced.
The central operator’s console allows the operator to
completely control the pulling operation with optimum
visibilty of the pulling rope. Operator controls include
linepull, linespeed, holding brake, levelwind and
engine controls. A freewheel disconnect and bronze
overspin brake are available for controlled payout
of the pulling rope.
OPTIONAL EQUIPMENT
• Hydraulic overhead levelwind.
• 6052 Heavy duty pulling drum.
• Hydraulic front jack.
• Combination overhead/underground levelwind.
• Underground pulling drum.
• BR-6030 Breakaway reel.
MODEL DPT-60
Continuous Torque Rating ................ 180,000 in.-lbs.
Continuous Linepull Rating ............... 6,000 lbs.
*Maximum Linespeed ....................... 0-4 mph
MODEL DPT-70
Continuous Torque Rating ................ 210,000 in.-lbs.
Continuous Linepull Rating ............... 7,000 lbs.
*Maximum Linespeed ....................... 0-3.4 mph
(*Linepull is shown at 60” diameter)
DIMENSIONS & WEIGHT
DPT60B
Unit Length ........................................ 17’-5”
Unit Width .......................................... 7’-8”
Unit Height ........................................ 7’-2”
Unit Weight ........................................ 9,150 lbs. (approx.)
DPT70B
Unit Length ........................................ 19’-2”
Unit Width .......................................... 8’-0”
Unit Height ........................................ 7’-6”
Unit Weight ........................................ 11,000 lbs. (approx.)
STANDARD FEATURES
• Proven hydrostatic pulling and tensioning system with
hydraulic oil cooler.
• 115 HP Water-cooled Diesel engine.
• Reel capacity up to 72” diameter, 52” wide and 6,000 lbs.
• Reel shaft diameter of 3-1/2”.
• Tandem axle with leaf spring suspension.
• Infinitely variable linespeed and linepull control.
• Free wheeling disconnect for high speed rope pull out.
• Spring applied-hydraulic pressure released holding brake.
• Central operator’s position for maximum safety
and visibility.
• Quick change reel shaft with straight vertical lift.
• Engraved operator’s console.