TSE DPT60, Owner'S Manual

Page: 147 / 459

Troubleshooting
Continued on next page ZE59858,0000026 -19-04MAR14-1/3
Diagnostic Trouble Codes (DTCs) — Listing
NOTE: Not all of these codes are used in all
engine applications.
NOTE: Not all DTCs are listed below. See your application
technical manual for more information.
There are several possible combinations of SPN and FMI
codes. To use the table below, first write down the SPN
and FMI codes you received from the engine diagnostic
gauge. Locate each SPN and its associated definition. In
the same way, locate the FMI and its associated definition.
FMI Code FMI Name
0 Extremely High
1 Extremely Low
2 Invalid
3 Out of Range High
4 Out of Range Low
5 High Resistance
6 Low Resistance
7 Mismatch
8 Signal Missing
9 Loss of Communication
10 Change Abnormal
11 Activated
12 Error
13 Fault
14 Incorrect Message
15 Slightly High
16 Moderately High
17 Slightly Low
18 Moderately Low
19 Communication Error
31
Condition Exists
SPN Code SPN Name
27 EGR Valve Position Signal
51
Air Throttle Actuator Position Signal
94 Low Pressure Fuel Pressure Signal
97 Water-in-fuel Signal
100 Engine Oil Pressure Signal
101 Crankcase Pressure
102 Manifold Air Pressure Signal
103 VGT Speed Signal
105 Manifold Air Temperature Signal
107 Air Filter Pressure Differential
108 Barometric Pressure Signal
109 Engine Coolant Pressure Signal
110
Engine Coolant Temperature Signal
111 Engine Coolant Level Alarm Switch
157 Fuel Rail Pressure Signal
158 ECU Power Down
168 Unswitched Battery Voltage
174 Fuel Temperature Signal
189
Engine Speed Derate
190 Engine Speed
412 EGR Temperature Signal
611 Injector Drive #1
612 Injector Drive #2
613
Fuel Pressure Control Valve Drive
629 ECU EEPROM
636 Camshaft Position Signal
637 Crankshaft Position Signal
651 Injector #1
652 Injector #2
70-2 032015
PN=100