TSE DPT60, Owner'S Manual

Page: 334 / 459

2
1.0 - GENERAL INFORMATION
1.1 - PURPOSE OF THE MANUAL
This Manufacturer’s manual provides information regarding the safe transport, handling, installation, mainte-
nance, repair, disassembly and dismantling of the gear unit.
All information for users and designers is given in the Sales Catalogue. As well as adhering to esta-
blished engineering practices, the information given in this manual must be read carefully and rigo-
rously applied.
Failure to observe the information provided herein may result in risks to personal health and safety, as well
as economic damages.
This information, provided in the Manufacturer’s original language (Italian), is also available in other langua-
ges to meet legal and commercial requirements.
The documentation must be stored by a person charged to do so in a suitable location so as to be always
available in good condition for consultation.
In case of loss or damage, replacement documentation must be requested directly from the Manufacturer,
quoting the code of this manual.
This manual reflects the state of the art at the time of commercialisation of the gear unit.
The Manufacturer reserves the right to modify, supplement and improve the manual, without the present pu-
blication being for that reason considered inadequate.
Particularly significant sections of the manual and important specifications are highlighted by symbols whose
meanings are explained below.
SYMBOLS
:
DANGER - WARNING
This symbol indicates situations of danger, which if ignored, may result in serious injury to
the operator.
CAUTION - ATTENTION
This symbol indicates the need to adopt specific precautions to avoid personal injury and da-
mage, as well as economic damages.
IMPORTANT
This symbol indicates important technical information.
Instructions marked by these symbols and highlighted in yellow, apply exclusively to equipment
complying with “ATEX” Directive 94/9/EC.
The operations identified by these symbols must be executed by professionally qualified opera-
tors specially trained in the safety precautions required for working in potentially explosive atmo-
spheres.
Failure to observe these instructions may result in serious safety and environmental risks.