TSC CPX4P Series, Service Manual

Page: 159 / 232

155
Code Detail Code Item Description
05 40
Title Printhead position error
Description
When Printhead located at the cap position is driven by the
predetermined number of pulses after initialization of its
position, Printhead HP Sensor is not turned ON.
Remedy
1. Check movement of Printhead Lifter part.
2. Replace Print Module.
3. Replace Printer Controller PCB.
05 41
Title
Printhead position error
Description
When Printhead located at the home position is driven by
the predetermined number of pulses after initialization of its
position was started, Printhead HP Sensor is not turned OFF.
Remedy
1. Check movement of Printhead Lifter part.
2. Check Printhead Lift Motor connector.
3. Replace Print Module.
4. Replace Printer Controller PCB.
05 42
Title
Printhead position error
Description
When Printhead located at the wipe position is driven
toward the home position by the predetermined number of
pulses, Printhead HP Sensor is not turned ON.
Remedy
1. Check movement of Printhead Lifter part.
2. Check Printhead Lift Motor connector.
3. Replace Print Module.
4. Replace Printer Controller PCB.
05 43
Title Printhead position error
Description
When Printhead located at the predetermined position is
driven toward the home position by the predetermined
number of pulses, Printhead HP Sensor is not turned ON.
Remedy
1. Check movement of Printhead Lifter part.
2. Check Printhead Lift Motor connector.
3. Replace Print Module.
4. Replace Printer Controller PCB.
05 45
Title Printhead position error
Description
When Printhead located at the printing position is driven
toward the home position, Printhead HP Sensor is not
turned ON.
Remedy
1. Reset Upper Printhead Release Lever
2. Reset Print Module Cover
3. Check movement of Printhead Lifter part.
4. Check Printhead Lift Motor connector.
5. Replace Print Module.
6. Replace Printer Controller PCB.
Code Detail Code Item Description
05 46-4D
Title Printhead position error
Description
When Printhead located at the predetermined position is
driven toward the home position by the predetermined
number of pulses, Printhead HP Sensor is not turned ON.
Remedy
1. Check movement of Printhead Lifter part.
2. Check Printhead Lift Motor connector.
3. Replace Print Module.
4. Replace Printer Controller PCB.
05 4E
Title Printhead position error
Description
When Printhead located at the home position is driven by
the predetermined number of times after descent of it
started for initialization, Printhead HP Sensor is not turned
OFF.
Remedy
1. Close Lower Printhead Release Lever.
2. Check movement of Printhead Lifter part.
3. Check Printhead Lift Motor connector.
4. Replace Print Module.
5. Replace Printer Controller PCB.
05 4F-50
Title Printhead position error
Description
When Printhead located at the predetermined position is
driven toward the home position by the specified number of
pulses, Printhead HP Sensor is not turned ON.
Remedy
1. Check movement of Printhead Lifter part.
2. Check Printhead Lift Motor connector.
3. Replace Print Module.
4. Replace Printer Controller PCB.
05 5E
Title Printhead position error
Description
When Printhead located at the home position is driven by
the predetermined number of pulses after descent of it
started, Printhead HP Sensor is not turned OFF.
Remedy
1. Check movement of Printhead Lifter part.
2. Replace Print Module.
3. Replace Printer Controller PCB.
05 62
Title Printhead position error
Description
When Printhead located at the wipe position moves to the
home position, Printhead HP Sensor is turned ON before
Printhead has been driven by the predetermined number of
pulses.
Remedy
1. Check movement of Printhead Lifter part.
2. Replace Print Module.
3. Replace Printer Controller PCB.