TSC CPX4P Series, Service Manual

Page: 221 / 232

217
3) Open Transport Guide and slide it in the arrow direction.
4) While pressing Jam Release Lever down, pull out paper.
5) Close Roll Cover.
6) Refer to the table 1 in step 4 of "Printing and Checking a Nozzle Check Pattern" to move Printhead to the
print position.
7) Open Upper Unit.
8) Place the Nozzle Check Pattern as shown in the figure.
CAUTION:
Do not keep Printhead at print position for a long time.
NOTE:
It takes approx. 5 sec. that Printhead comes to the print position.