TSC CPX4P Series, Service Manual

Page: 161 / 232

157
Code Detail Code Item Description
06 44-49
Title Purge Unit position error
Description
When Purge Unit located at the predetermined position is
driven by the predetermined number of pulses after
movement toward the home position is started, Purge
Position Sensor is not turned ON.
Remedy
1. Check movement of Purge Unit.
2. Replace Purge Unit.
3. Replace Printer Controller PCB.
06 5E
Title Purge Unit position error
Description
When Purge Unit located at the home position is driven by
the predetermined number of pulses after movement
toward the predetermined position is started, Purge
Position Sensor is not turned OFF.
Remedy
1. Check movement of Purge Unit.
2. Replace Purge Position Sensor.
3. Replace Purge Unit.
4. Replace Printer Controller PCB.
06 63
Title Purge Unit position error
Description
When Purge Unit located at the cap position moves to the
home position, Home Position Sensor is turned ON before it
has been driven by the predetermined number of pulses.
Remedy
1. Check movement of Purge Unit.
2. Replace Purge Position Sensor.
3. Replace Purge Unit.
4. Replace Printer Controller PCB.
06 64-69
Title Purge Unit position error
Description
When Purge Unit located at the predetermined position
moves to the home position, Home Position Sensor is turned
ON before it has been driven by the predetermined number
of pulses.
Remedy
1. Check movement of Purge Unit.
2. Replace Purge Position Sensor.
3. Replace Purge Unit.
4. Replace Printer Controller PCB.
07: Supply Valve Error
07 20
Title Supply Valve error
Description
When Ink Supply Valve is driven by the predetermined
number of pulses after initialization of its position started,
Pump Valve Sensor 2 is not turned ON.
Remedy
1. Check Pump Unit connector.
2. Replace Print Module.
3. Replace Printer Controller PCB.
Code Detail Code Item Description
07 21
Title Supply Valve error
Description
When Ink Supply Valve is driven by the predetermined
number of pulses after closing of it is started, Pump Valve
Sensor 2 is not turned ON.
Remedy
1. Check Pump Unit connector.
2. Replace Print Module.
3. Replace Printer Controller PCB.
07 22
Title Supply Valve error
Description
When Ink Supply Valve is driven by the predetermined
number of pulses after opening of it is started, Pump Valve
Sensor 2 is not turned OFF.
Remedy
1. Check Pump Unit connector.
2. Replace Print Module.
3. Replace Printer Controller PCB.
07 23
Title Supply Valve error
Description
When Ink Supply Valve (Bk) is driven by the predetermined
number of pulses after opening of it is started, Pump Valve
Sensor 2 is not turned ON.
Remedy
1. Check Pump Unit connector.
2. Replace Print Module.
3. Replace Printer Controller PCB.
07 24
Title Supply Valve error
Description
When Ink Supply Valve (C) is driven by the predetermined
number of pulses after opening of it is started, Pump Valve
Sensor 2 is not turned ON.
Remedy
1. Check Pump Unit connector.
2. Replace Print Module.
3. Replace Printer Controller PCB.
07 25
Title Supply Valve error
Description
When Ink Supply Valve (M) is driven by the predetermined
number of pulses after opening of it is started, Pump Valve
Sensor 2 is not turned ON.
Remedy
1. Check Pump Unit connector.
2. Replace Print Module.
3. Replace Printer Controller PCB.
07 26
Title Supply Valve error
Description
When Ink Supply Valve (Y) is driven by the predetermined
number of pulses after opening of it is started, Pump Valve
Sensor 2 is not turned ON.
Remedy
1. Check Pump Unit connector.
2. Replace Print Module.
3. Replace Printer Controller PCB.