TSC CPX4P Series, Service Manual

Page: 218 / 232

214
2) Press Power key while holding [PAUSE] and [FEED] Keys ON simultaneously. Release Key when buzzer
sounds second time.
3) Press [PAUSE] Key once to enter Maintenance Mode.
4) Hold [PAUSE] Key down again. Release [PAUSE] Key when the buzzer sounds 5 times. After releasing
[PAUSE] Key, confirm Ink Warning Lamps of cyan (C) and yellow (Y) are lit.
NOTE:
•
Keep pressing 3 keys down until the second buzzer sounds.
<Timing when the buzzer sounds>
1st time: Immediately after pressing 3 Keys.
2nd time : 7 seconds after the first
•
Check that Power lamp is repeating 3-time flash.
NOTE:
When Printer enters Maintenance Mode, Power lamp is repeating 4-time flash. If Power lamp is lit,
hold Power key for 1 second or longer to shutdown and try again.
NOTE:
•
Buzzer beeps every 1 sec. When [PAUSE] Key is holding pressed at Maintenance Mode.
• If a wrong function has mistakenly been selected, try again to select the Nozzle Check Pattern
Printing by simply pressing [PAUSE] Key down and wait for 5 buzzer sounds.
•
When Printer is left untouched for 15 sec. or more after selecting the function, the current
selection is canceled and the function should be selected again with [PAUSE] Key.
•
<Table 1>.
[PAUSE] Key release timing Function to execute
Buzzer sounds once (1 second later) Strong cleaning
Buzzer sounds twice (2 seconds later) Initial ink loading
Buzzer sounds 3 times (3 seconds later) Shipping the printer
Buzzer sounds 4 times (4 seconds later) Printhead replacement
Buzzer sounds 5 times (5 seconds later) Nozzle check pattern printing
Buzzer sounds 6 times (6 seconds later) Setting value printing
Buzzer sounds 7 times (7 seconds later) Printhead moving to print position
Buzzer sounds 8 times (8 seconds later) Not to execute
9 seconds or more later (no buzzer) Not to execute (no buzzer)