TSC CPX4P Series, Service Manual

Page: 191 / 232

187

Test Print / Adjustment
No. Item Description
[1] Test Print
Standard size • Set the standard size paper used for test printing.
Paper width • Set the horizontal size of paper used for test printing.
Paper length • Set the vertical size of paper used for test printing.
Copies • Set the number of copies to print for test printing.
Gap length • Set the gap length of paper used for test printing.
TOF mark length • Set the mark length of paper used for test printing.
Top margin • Set the top margin of test print image.
Bottom margin • Set the bottom margin of test print image.
Left margin • Set the left margin of test print image.
Right margin • Set the right margin of test print image.
Left gap • Set the left gap of test print image.
Right gap • Set the right gap of test print image.
Feed speed • Set the transport speed for test printing.
No. Item Description
[1] Test Print
Paper form • Set the type of paper used for test printing.
Cut interval
• Set the cutting interval for test printing (when Auto
Cutter is installed).
Auto cutter • Turn ON/OFF the optional cutter unit function.
Nozzle Check
Pattern
• Pattern for checking discharge state of nozzles.
Setting parameters
• Pattern for checking the settings values such as
registration adjustment value.
No Print Pattern
• The printhead is moved to the print position and
paper is fed to check the paper feed condition. Ink is
not discharged.
Paper width
• Horizontal sizes (widths) of paper is classified as
follows and the currently set horizontal size of paper
is displayed.
• S-size: Paper width = 25.4 mm to 35.0 mm
• M-size: Paper width = 35.1mm to 73.0mm
• L-size: Paper width = 73.1mm to 120.0mm
[2] Adjustment
Vertical Scale
Adjustment
• Perform test printing and adjust vertical scale.
Printhead Slant
Adjustment
• Perform test printing and adjust printhead slant.
[3]
Head
position
adjustment
Registration
Adjustment
• Perform test printing and adjust registration.
Registration Fine
Adjustment
• Perform test printing and adjust fine registration.
Copy L setting to S
and M
• Reflect the result of registration adjustment made
using L-size (horizontal size) paper into S-size and
M-size.
*1. This operation is not required when registration
adjustment is performed for S-size and M-size
separately.
[4]
Other
setting
Complement
non-firing nozzle • Perform test printing and complement non-firing
nozzle.
TK-GAP
(Transparent)
• The TK-GAP is displayed. It can be set here.
TK-GAP (Reflective) • The TK-GAP is displayed. It can be set here.
Auto cutter Cut
position • Cut position of Auto Cutter (Option) is displayed. It
can be set here.
Stop position • Stop position of paper is displayed. It can be set here.
[1]
[2]
[3]
[4]