TSC CPX4P Series, Service Manual

Page: 94 / 232

90
1) Set Protective Sheet supplied with new Printhead on Transport Unit.
2)
Select [Parts Replacement > Consumable Parts Replacement > Head] of Service Utility and click
[Start] to drain ink.
3)
Remove Maintenance Cover. (Refer to ch. "Removing Maintenance Cover".)

2 screws
4)
Remove Printhead Replacement Tool.

2 screws
5) Remove Tube. (Refer to ch. "Removing Tube".)
6) Remove Blade Cleaner. (Refer to ch. "Removing Blade Cleaner".)
CAUTION:
•
Before removing Printhead Unit, move Printhead Unit to the position shown
below (Printhead replacement position) using Service Utility. Then, open
Upper Printhead Release Lever and remove Printhead.
•
Do not open Upper Printhead Release Lever forcibly when it is at a position
where it cannot be opened/closed. A failure can result.