Triumph Adler P-C2660, User Manual

Page: 79 / 578

Preparation before Use
2-37
2
*1 This is displayed when the optional SSD is installed.
*2 The fax function only shows P-C2665 MFP.
*3 The logged in user may not be able to configure some settings, depending on the permissions of the user.
*4 This is displayed when the optional Card Authentication Kit is installed.
NOTE:
Here, information on the FAX settings has been omitted. For more information on using the FAX, refer
to the FAX Operation Guide .
Accessing Embedded Web Server RX
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Embedded Web Server RX as well as
their current status.
NOTE:
If the screen “There is a problem with this website's security certificate.” is displayed, configure the
certificate. For details on Certificates, refer to the Embedded Web Server RX User Guide .
You can also continue the operation without configuring the certificate.
3
Select a category from the navigation bar on the left of the screen. When you log in to the machine as an
administrator, you will see
Device Settings , Function Settings , Network Settings , Security Settings ,
and Management Settings .
Management
Settings Configure the advanced management settings.
Job Accounting , Authentication , ID Card
*4
,
Notification/Report , History Settings , SNMP , Reset
○ -
Setting Description
Adminis-
trator
General
User