manualshive.com logo in svg

Triumph Adler P-C2660, User Manual

Share
Download
Triumph Adler P-C2660 User Manual Download Page 64

Preparation before Use 

2-22

27

Press the 

OK

 key. Default Gateway appears.

28

Use the arrow keys to enter the Default Gateway.

Press the 

 or 

 key to move the cursor position 

horizontally.

Press the 

 or 

 key or the numeric keys to enter 

the Default Gateway. Each 3 digits can be set 
between 000 and 255.

IMPORTANT: 

When the DHCP Setting (

page 2-15

) is 

[On], the current Default Gateway is displayed and 
cannot be changed.

When setting an Default Gateway, set the DHCP 
Setting (

page 2-15

) to Off.

29

Press the 

OK

 key. 

Completed.

 is displayed and the 

screen returns to the IPv4 Setting menu.

Default Gateway:

a

 

 

b

 

   123.145.167.

189

Summary of Contents for P-C2660



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands