Triumph Adler DCC 6526L, User Manual

Page: 61 / 526

Preparation before Use
2-16
11
Press the
OK
key. The IPv4 Setting menu appears.
12
Press the  or  key to select [DHCP].
13 Press the
OK
key. DHCP appears.
14
Press the  or  key to select [On] and then press
the
OK
key.
Completed.
is displayed and the screen returns to
the IPv4 Setting menu.
15
Press the  or  key to select [Auto-IP].
16
Press the
OK
key. Auto-IP appears.
17
Press the  or  key to select [On] and then press
the
OK
key.
Completed.
is displayed and the screen returns to
the IPv4 Setting menu.
TCP/IP (IPv4) Setup (by Entering IP Addresses)
Set up TCP/IP to connect to the Windows network. Set the IP addresses, subnet masks, and gateway
addresses. The default settings are "TCP/IP Protocol:
On
, DHCP:
On
, Bonjour:
Off,
Auto-IP:
On
".
NOTE:
Before setting an IP address, ask your network administrator if your network environment requires
input of an IP address. If input is necessary, ask your network administrator to obtain an IP address for you.
IPv4 Setting:
a b
*********************
2
Bonjour
3
Auto-IP
[ Exit ]
1
DHCP
DHCP:
a b
1
Off
*********************
2
*On
IPv4 Setting:
a b
1
DHCP
2
Bonjour
*********************
[ Exit ]
3
Auto-IP
Auto-IP:
a b
1
Off
*********************
2
*On