Triumph Adler DC 6130, User Manual

Page: 96 / 438

3-8
Basic Operation
6
Remove the finished copies from the inner tray.
Adjusting Density
Use this procedure to adjust the density when copying.
NOTE:
You may choose Auto mode as the default setting (refer to Density on page 8-46 ).
The procedure for adjusting the density of copies is explained below.
1
Press the Function Menu key. Function Menu appears.
2
Press the U or V key to select [Density].
3
Press the OK key. Density appears.
4
Press the U or V key to select [Auto] or [Manual].
5
Press the OK key.
When [Manual] is selected, Manual appears. Press the
U or V key to select your desired density and then press
the OK key.
Completed. is displayed and the screen returns to the
basic screen.
6
Press the Start key. Copying begins.
Density Adjustment Option Description
Manual Adjust density using 7 levels.
Auto Optimum density is selected according
to the density of the original.
Function Menu:
a b
*********************
2 Collate T
3 Duplex T
[ Exit ]
1 Paper Selection T
Density:
a b
1
Auto
*********************
2
*Manual
Manual:
a b
3 v
Lighter -1
*********************
5 y
Darker
+1
4 w
Normal
0