Triumph Adler DC 6130, User Manual

Page: 319 / 438

8
8-127
Default Setting (System Menu)
8
Press the OK key. IPv6 Setting appears.
9
Press the
U
or
V
key to select [On] or [Off].
10
Press the OK key. Completed. is displayed and the
screen returns to the TCP/IP Settings menu.
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is "
On ".
Use the procedure below to setup the NetWare setting.
1
In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
2
The System menu appears.
3
Press the U or V key to select [Network Setting].
4
Press the OK key. The Network Setting menu appears.
5
Press the U or V key to select [NetWare].
IPv6 Setting:
a b
*********************
2
On
[ Exit ]
1
*Off
Sys. Menu/Count.:
a b
1
Report
2
Counter
*********************
[ Exit ]
3 System
Login User Name:
L b
*******************
Login Password:
[ Login ]
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Network Setting:
a b
*********************
2 NetWare
3
AppleTalk
[ Exit ]
1 TCP/IP Settings