Triumph Adler DC 6130, User Manual

Page: 44 / 438

Preparation before Use
2-10
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header
of the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
NOTE:
Be sure to set the time difference before setting the date and time.
1
Press the System Menu/Counter key on the main unit
operation panel.
2
In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
3
Press the OK key. The Common Settings menu appears.
4
Press the
U
or
V
key to select [Date Setting], and press
the OK key.
5
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select key).
NOTE:
The following administrator is registered in the
machine at the factory.
Login User Name: 30 ppm model:3000, 35 ppm model:3500
Login Password:
30 ppm model:3000, 35 ppm model:3500
6
The Date Setting menu appears.
7
Press the U or V key to select [Time Zone].
Sys. Menu/Count.:
a b
3
System
4 User/Job Account
*********************
5
Common Settings
Common Settings:
a b
*********************
2 Default Screen
3
Sound
[ Exit ]
1 Language
Login User Name:
L b
********************
Login Password:
[ Login ]
Date Setting: a b
*********************
2
Date Format
3
Time Zone
[ Exit ]
1
Date/Time