Triumph Adler DC 6130, User Manual

Page: 76 / 438

Preparation before Use
2-42
5
Load the paper in the cassette. Ensure the side to be
printed is facing down and the paper is not folded, curled,
or damaged.
IMPORTANT: Do not load paper above the triangle mark
located on the width guide.
• Before loading the paper, be sure that it is not curled or
folded. Paper that is curled or folded may cause paper
jams.
• Ensure that the loaded paper does not exceed the level
indicator (see illustration below).
• When loading the paper, keep the side that was closest
the package seal facing up.
• The paper length and width guides must be adjusted to
the paper size. Loading the paper without adjusting these
guides may cause skewed feeding and paper jams.
• Be sure that the paper length and width guides rest
securely against the paper. If there is a gap, readjust the
guides to fit the paper.
6
Insert the paper cassette into the slot in the machine.
Push it straight in as far as it will go.
There is a paper gauge on the left side of the front of the
paper cassette to indicate the remaining paper supply.
When paper is exhausted, the pointer will go down to the
level of (empty).
NOTE:
If the machine will not be used for a prolonged
period, protect all paper from humidity by removing it from
the cassettes and sealing it in the paper storage bag.
7
Select the media type (plain, recycled, etc.) loaded in the
cassette. (Refer to
Specifying Paper Size and Media
Type for the Cassettes on page 2-47 .)