M
ENU
F
UNCTIONS
Operator Manual Rev 1.1
Page 21
DISPLAY MODE
Gives access to 3 display modes: COLOR, GREEN and B/W
In 3D mode, DISPLAY MODE menu is not available. Display settings are done in MENU / 3D / MODE
menu.
COLOR
Standard mode, displays the picture with 16 million colors, 256 gray levels.
GREEN
Display the picture in green color only.
TINT and SATURATION are not working in this mode.
This mode has been invented by Transvideo in 1990 and is used since this time in Film & Night Vision
systems.
B/W
Displays the picture with 256 gray levels.
TINT and SATURATION are not working in this mode.
BLUE CHECK
Sets the monitor in BLUE ONLY mode.
This mode is used to calibrate the monitor with an incident color bar.
COLORIMETRY
MANUAL
Allows the manual adjustment of RGB gain (from 0 to 2, nominal 1.00) and offset of the black (-
127mV to + 126mV, nominal 0 mV).
The nominal value in manual mode corresponds to the D65 setup.
IMPORTANT:
In MANUAL there is a risk of displaying wrong colors; this option must be used carefully.
D56 CALIBRATED
Sets the monitor for a white point DAYLIGHT 5600
CIE 1931 Coordinates:
x:
0.3310
y:
0.3460
D65 CALIBRATED
Sets the monitor for a white point DAYLIGHT 6500
CIE 1931 Coordinates:
x:
0.3127
y:
0.3290
