M
ENU
F
UNCTIONS
Page 26
CineMonitor
HD
3DView RF
HORIZON
Displays a color coded electronic leveler on the screen.
SENSOR
Toggles between internal and external sensors
- IN COMP *
Internal sensor with compensation of acceleration
- INTERNAL
Internal sensor
- BETZ
Uses external electronic bubble designed by BETZ Tools
DISPLAY: NORMAL / REVERSE
Toggles the action of the horizon, normal or reversed.
RANGE
Sets the range of the horizon
IN COMP
+/-2°, +/-5°, +/-10°, +/-22°, +/-45°, +/-90°
INTERNAL
+/-5°, +/-10°, +/-22°, +/-45°, +/-90°
BETZ
n/a
STYLE
Displays the Horizon on the monitor and selects the style of the virtual horizon (6 different models).
0 CAL
Sets the horizon to 0. A temporization of 5 seconds allows the user to stabilize the position of the
system. Pushing the rotating knob during calibration exits from the timing.
POSITION
Allows the user to place the tool in different position of the screen by using arrows and the rotating
knob when USER is selected in POSITION sub menu. DEFAULT replaces the tool at the factory
preset.
About Betz horizon:
In BETZ position the user must connect an external electronic bubble designed by Betz Tools. A
specific cable is needed to power and remote the bubble through J001 connector. Transvideo do
not support this third party equipment.
* Available only if VirtualHorizon2™ option is implemented in the monitor. VirtualHorizon2 is an
optional feature. It can be ordered with the monitor or implemented though an upgrade. Contact
Transvideo SA for more information.
