M
ENU
F
UNCTIONS
Page 28
CineMonitor
HD
3DView RF
MEASUREMENTS
Allows different settings for the video measurement tools.
The settings apply to all video measurement tools except the histogram, which represents always the
full picture.
SIGNAL UNIT
Selects the signal measurement unit.
IRE (default unit) or BINARY
SIGNAL ANALYSIS
Selects 8 bits if the SIGNAL is 8 bits.
Default value: 10 bits
OVEREXPOSURE: ON/OFF
Activates or deactivates the overexposure zoning on the measurement tools.
SORIN: ON/OFF
Activates or deactivates the Sorin’s Marker zoning on the measurement tools.
BLACK LIMITS: ON/OFF
Activates or deactivates the black limits zoning on the measurement tools.
1 LINE
Displays the measurement of one line selected with the rotating knob.
12 LINES
Displays the measurement of a group of 12 lines.
The first line is selected with the rotating knob.
ALL LINES
Displays the measurement of the whole picture.
BACKGROUNG INTENSITY
Adjusts the overlay transparency behind the measurement tools (when displayed
in front of the
picture).
SPOT INTENSITY
Adjusts the brightness of the waveform spot.
RETICULE INTENSITY
Adjusts the brightness of the waveform reticule.
About 1 - 12 Lines selection:
The selection of the acquisition zone can be allocated to the "User" key (see chapter "D
IRECT
F
UNCTIONS
" section "User").
