U
SING THE
D
IRECT
F
UNCTIONS
Operator Manual Rev 1.1
Page 17
Vectorscope
Selecting "F3: VECTOR" displays the vectorscope.
Press rotating knob to exit from menu.
Zoom
Short push on
Zoom
– activates / deactivates the zoom mode.
Arrows move the picture on Top/Bottom, Left/Right positions. Moving increments are proportional
to 1/8 of the video standard. Fine adjustment can be made by rotating the rotating knob.
A long push on the Zoom key centers the picture, the next push sends back to the full picture
display.
During the zoom mode a pictogram is displayed in the right side of the tool zone.
This pictogram indicates the relative position of the magnified zone in the original picture.
In HD
In HD, the picture is displayed in full resolution mode (pixel to pixel).
Depending of the input format, the magnification ratio can be different.
In SD
In SD, the picture is displayed in full screen.
In this case there is an important magnification ratio applied to the original picture. The resultant
picture includes created pixels and lines and cannot be considered as a proof. In this mode the
waveform will be superimposed to the picture.
