P
RODUCT OVERVIEW
Operator Manual Rev 1.1
Page 11
User interface
The CineMonitorHD 3DView RF family offers a user interface common to all sizes. Some functions are
directly accessible from the "direct functions" keypad, others from the menu with use of the rotating
knob.
The CineMonitorHD screen is partitioned in two areas:
①
The picture zone displays the picture from the camera in 16/9 format
②
The tools zone displays tools and measurements in the remaining area of the screen.
Figure 2 show the front of a 8” CineMonitorHD 3DView RF.
Figure 2: CineMonitorHD8 3DView RF front
Direct functions
Several direct functions are available from the keypad.
One short press on a key gives access to the function.
One long press (more than 2 seconds) on a key gives access to the sub functions of the related
function (if any). Pressing F1…F4 enables to adjust those sub functions.
Depending of the function, options and environment, the content of F1…F4 may differ. Pressing a key
will activate or deactivate the sub function. An activated sub function is highlighted by an orange text
while an inactivated function prompts in white.
In some specific case, F4 may extend the selection to a second page of sub menu.
