U
SING THE
D
IRECT
F
UNCTIONS
Operator Manual Rev 1.1
Page 15
When SAFE AREA is selected in the sub menu, one short press on the Marker key displays "TURN
TO ADJUST SAFE AREA: XX%". Rotating the knob makes it possible to adjust the safe area on the
picture from 10 to 99%. SAFE AREA is selected by default at start-up or after a reset and with a value
of 90%.
When DEROBE’S GRID is selected in the sub menu,
①
one short press on the Marker key displays "TURN TO ADJUST GRID OFFSET: XX PIXELS".
Rotating the knob makes it possible to adjust the grid offset of plus or minus half of the step of
the grid.
②
one long press (more than 3 seconds) on the Marker key displays "TURN TO ADJUST GRID: XX
pix x.xx%". Rotating the knob makes it possible to modify the step of the grid from 6 to 122
pixels.
Measurements
Short push on
Measure
–
toggles the different views of the selected measurement
Long push on Measure to select the measurement to display.
Long push on
Measure
– measuremet selection
Press F1 to select Waveform
Press F2 to select Luminance histogram
Press F3 to select Vectorscope
The brightness of the reticule and of the spot as well as the background transparency in overlay
mode (for waveform and vectoscope) can be adjusted in MENU / TOOLS / MEASUREMENT.
White and black clipping alert can be configured in MENU / TOOLS / LIMITS. The same limits are
used for the waveform and the histogram. Setting these limits is useful to have a visual alert on the
measurement tools if there is a risk of overexposure or of loss of black details.
When using the 3D mode the measurement tools display the two inputs simultaneously. It is valid for
the Waveform, Histogram and Vectorscope. To identify clearly the source each spot uses a specific
color. The colors used are the same as those used for the 3D representation. Selection is done in
MENU / 3D / COLOR, i.e.:
①
using the HISTOGRAM with RED/CYAN colors will display input 1 in RED and input 2 in CYAN.
The common values of the HISTOGRAM will be displayed in white, the differences in RED or
CYAN.
②
using the HISTOGRAM with RED/BLUE colors will display input 1 in RED and input 2 in BLUE.
The common values of the HISTOGRAM will be displayed in MAGENTA, the differences in RED or
BLUE.
