M
ENU
F
UNCTIONS
Operator Manual Rev 1.1
Page 25
FOCUS HELPER
Activates a precise focus helper displaying in-focus zones with colored dots. The focus helper is
based on a complex multidimensional digital filter.
When 3D mode is activated the in-focus zone of each camera is displayed with a specific color. The
colors used are the same as those used for the 3D representation. Selection is done in MENU / 3D /
COLOR.
The focus helper can be remoted by the User key. The settings must have been previously configured
(Press long time User key, then set the function with F1…F4).
COLOR
Selection of the in-focus zone color.
Red, Green, Blue, Yellow, Magenta, Cyan, Black or White.
LEVEL
Adjustment of the selectivity of the filter.
OFF, 1 to 9 (9 gives the highest effect)
FRAMELINE
Enables to displays one locating cross and up to 3 programmable frames with or without center
marker and a matting generator.
CROSS
CROSS ON/OFF
Activation of the cross
COLOR
Selection of the color of the lines
WIDTH
Selection of the width of the lines
V POS
Vertical position of the cross
H POS
Horizontal position of the cross
FRAME 1…3
FRAME 1…3 ON/OFF
Activation of the frame
CENTER ON/OFF
Activation of the center cross
COLOR
Modification of the color of the frame
DOT
Modification of the structure of the frame
SEND TO CENTER
Sends the frame to the center of the screen.
V SIZE
Size of the frame (bottom part is moving)
H SIZE
Size of the frame (right part is moving)
V POS
Vertical position of the frame
H POS
Horizontal position of the frame
V ZOOM
Vertical homothetic modification of the frame
H ZOOM
Horizontal homothetic modification of the frame
SEND ALL TO CENTER
Sends all frames to the center of the screen.
BCKGND COLOR
(Matting Generator)
Selects the background color outside of the frames.
