Operator Manual Rev 1.1
Page 13
M
ODULE
A
SSOCIATION
IMPORTANT:
Both the transmitter and receiver need to be associated (or paired).
The operation can be performed in P2P mode or BROAD mode.
There is no need to perform the module association in both modes.
Step 1
Turn on the TitanHD Tx. During the startup, keep on pressing Back key until the message "Push OK
to register" is displayed.
Step 2
Turn on the CineMonitorHD 3DView RF. Go to MENU / LINK / ASSOCIATION. "Associate modules"
appears on the screen.
Step 3
Select "Yes" on the CineMonitorHD 3DView RF and press "OK" on the TitanHD Tx. "Linking…"
appears on both monitor and transmitter.
Step 4
"Link OK" appears, then the system starts up.
