M
ENU
F
UNCTIONS
Page 24
CineMonitor
HD
3DView RF
/i LENS
The /i Lens Reader from Transvideo reads the metadata from
/i
lenses to display in real time the iris,
focus and zoom on an intuitive graphic representation. The /i Lens Reader also displays the depth of
filed and the hyperfocal point.
Accepted lenses (with automatic detection):
Cooke™ 5/i and S4/i connected to the monitor through RS232
Two graphics are available: Mobile where the scales are moving as on a real lens; static where the
markers are moving on the scales.
MODULE: ON/OFF
Activates or deactivates the function
RING: MOBILE/STATIC
Toggles between mobile and static rings display.
IRIS: DECIMAL/FRACTIONS
Toggles the iris value between decimal and fraction values.
ZONE: OP+ASSIT / ASSIST / OFF
Available only if a Cooke 5/i is connected to the monitor. The COOKE 5/i is able to light the focus and
iris scales on the operator and/or the assistant side.
Selection of the lighted zones OP ASSISTANT or ASSISTANT ONLY
BRIGHTNESS
Adjusts the brightness of the LEDs on a COOKE 5/i lens.
UNIT
Selection of METRIC or IMPERIAL unit.
FILM
Selection of 16mm or 35mm.
