Tractel Tirak MWX 1020, Original Operation And Installation Manual

Page: 40 / 136

Installation and operating manual
EN-28 G961.1 - 03/2012
Fault
Cause Elimination
The load cannot be lowered / slackened although the rope can be lifted / pulled.
Driven reeler:
Rope end switch (limit switch DOWN) or slack rope monitor has been
triggered.
– Eliminate the slack rope: e.g. turn the drum manually until the rout-
ing arm releases the limit switch.
– Determine the cause.
– Avoid reoccurrence, e.g. by using a longer rope.
The rope cannot be fed in.
Rope tip faulty.
– Renewing rope tips, see '15.4 Care and maintenance, Rope' on
page 22.
The driven reeler has not wound on cleanly and a loop has formed.
The sliding clutch is incorrectly set up
Oil level insufficient.
– Have TRACTEL Greifzug GmbH inspect/adjust the driven reeler.
– Have the oil level checked by authorized maintenance personnel.
Oil leaking from the driven reeler.
Driven reeler sliding clutch is leaking.
– Have TRACTEL Greifzug GmbH repair the driven reeler.