Toyota OM30875U Manual Download

Page: 119 / 144

OTHER FUNCTIONS

125

The speech command system enables
you to operate the navigation system,
audio system and air conditioning sys-
tem (Fahrenheit [

F] models only) by

giving a command.

1. Push the talk switch.

A beep sounds and on screen message is

displayed with an indicator at the top left.

2. Give a command while an indicator
is shown in the display.

If you want to check the command list,
touch “Help” to display the help screen.
(See “Help screen” on page 127.) When
you touch “Cancel”, the previous
screen returns.

If the navigation system does not respond

or the confirmation screen does not disap-

pear, please push the talk switch and try

again.
If no command is given, a beep sounds

and the indicator disappears 6 seconds

later.
If the system does not recognize your

speech, the system will respond with this

message (“System does not recognize

this command, please rephrase your com-

mand.”). Start the operation from the be-

ginning.

Speech command system

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands