Toyota OM30875U Manual Download

Page: 95 / 144

ADVANCED FUNCTIONS

101

5. Touch the button to be edited.

“Name”:

To edit the name of the area to

avoid. The names can be displayed on the

map. (See page 101.)

“Location”:

To edit area location. (See

page 102.)

“Area Size”:

To edit area size. (See page

102.)

“Active”:

To turn on or off the area to avoid

feature. To turn on the feature touch “

”

on the “Edit Area to Avoid” screen. To turn

off the feature touch “

OFF

” on the “Edit

Area to Avoid” screen.

6. Touch “OK”.

To change “Name”

1. Touch “Name” on the “Edit Area to
Avoid” screen.

2. Enter the name using alphanumeric
keys.

Up to 24 letters can be entered.

3. Touch “OK”.

The previous screen will be displayed.

DISPLAYING NAMES OF AREAS TO BE
AVOIDED

The name of an area to be avoided that

may be displayed on the map can be set.

To show the name, touch “ON” on the
“Edit Area to Avoid” screen. To not
show it, touch “OFF”.

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands