Toyota OM30875U Manual Download

Page: 112 / 144

OTHER FUNCTIONS

118

It is possible to register a dealer in the sys-

tem. With dealer information registered,

route guidance to the dealer is available.

1. Push the “INFO” button.

2. Touch “Maintenance”.

3. Touch “Set Dealer” on the “Mainte-
nance” screen.

4. If the dealer has not been registered,
enter the location of the dealer in the
same way as for a destination search.

(See “Destination search” on page 39.)
When “Set Dealer” registration is finished,

the “Edit Dealer” screen will be displayed.

5. Touch the button to be edited.

“Dealer”:

To enter the name of a dealer.

(See page 119.)

“Contact”:

To enter the name of a dealer

member. (See page 119.)

“Location”:

To set a location. (See page

119.)

“Phone #”:

To set a telephone number.

(See page 120.)

“Delete Dealer”:

To delete the dealer in-

formation displayed on the screen.

“Enter

”:

To set the displayed dealer as

a destination.

(See “Starting route guid-

ance” on page 59.)

— Dealer setting

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands