Toyota OM30875U Manual Download

Page: 135 / 144

APPENDIX

141

END−USER TERMS

The data (“Data”) is provided for your

personal, internal use only and not for

resale. It is protected by copyright, and

is subject to the following terms and

conditions which are agreed to by you,

on the one hand, and DENSO

CORPORATION (“[CLIENT]”) and its

licensors (including their licensors and

suppliers) on the other hand.

The Data for areas of Canada includes

information taken with permission from

Canadian authorities, including:

Her

Majesty the Queen in Right of Canada,

Queen’s Printer for Ontario,

Canada Post Corporation,

GeoBase

NAVTEQ holds a non

−

exclusive li-

cense from the United States Postal

Service

to publish and sell ZIP+4

information.

United States Postal Service 2006.

Prices are not established, controlled

or approved by the United States Post-

al Service

. The following trademarks

and registrations are owned by the

USPS: United States Postal Service,

USPS, and ZIP+4.

TERMS AND CONDITIONS

Personal Use Only. You agree to use

this Data together with the navigation

system for the solely personal, non

−

commercial purposes for which you

were licensed, and not for service bu-

reau, time

−

sharing or other similar pur-

poses. Accordingly, but subject to the

restrictions set forth in the following

paragraphs, you may copy this Data

only as necessary for your personal

use to (i) view it, and (ii) save it, pro-

vided that you do not remove any copy-

right notices that appear and do not

modify the Data in any way. You agree

not to otherwise reproduce, copy,

modify, decompile, disassemble or re-

verse engineer any portion of this

Data, and may not transfer or distribute

it in any form, for any purpose, except

to the extent permitted by mandatory

laws. Multi

−

disc sets may only be

transferred or sold as a complete set

as provided by [CLIENT] and not as a

subset thereof.

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands