Toyota OM30875U Manual Download

Page: 89 / 144

ADVANCED FUNCTIONS

To change “Quick Access”

It is possible to change attributes of the

quick access points. Memory points with

a set attribute can be used as a “Quick

Access” or “Home” touch

−

screen button.

(See “ — Destination search by Home” on

page 42 and “ — Destination search by

Quick access” on page 42.)

1. Touch “Quick Access” on the
“Memory Point” screen.

2. Touch the desired attribute.

It is possible to replace a registered attrib-

ute.

3. To replace the attribute, touch
“Yes”. To return to the previous screen,

touch “No” or

INFORMATION

One “Home” and five “Quick Access”
can be set.

DELETING “Quick Access”

1. Touch “Del.”.

2. To delete an attribute, touch “Yes”.
To return to the previous screen, touch

“No” or

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands