Toyota OM30875U Manual Download

Page: 44 / 144

DESTINATION SEARCH

(b) Search by “Category”

The destination can be set by selecting the

search point and the POI category.

Set the search point by the following
method:

1. Input the city center

2. Set the current position as the search

point

3. Set the search point via the map

screen

4. Set the search point from any destina-

tion

It is possible to display the names of POIs

located within approximately 20 miles (32

km) from the selected search point.

INPUTTING THE CITY CENTER

1. Touch “Input City Center”.

2. Input the city center name.

3. Touch the button of the desired city
center name.

When an arrow facing the desired point is

touched, the map scrolls in that direction.

Releasing the finger from the arrow will

stop the scrolling.

4. Touch “Enter”.

The search point is set and the “POI Cate-

gory” screen will be displayed.

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands