Toyota OM30875U Manual Download

Page: 104 / 144

ADVANCED FUNCTIONS

110

Voice guidance in all modes

When the “Voice Guidance in All Modes”

feature is turned on, the voice guidance in

all modes can be heard.
When the “Voice Guidance in All Modes”

feature is turned off, voice guidance can-

not be heard when using the audio system.
To turn the “Voice Guidance in All Modes”

on:

1. Push the “MENU” button.

2. Touch “Setup” on the “Menu”
screen.

Then touch

to display page 2 of the

“Setup” screen.

3. Touch “ON” of “Voice Guidance in
All Modes”.

The selected button is highlighted.

4. Touch “OK”.

Auto voice guidance

When the “Auto Voice Guidance” feature is

turned on, the voice guidance can be

heard automatically.
When the “Auto Voice Guidance” feature is

turned off, the voice guidance can be

heard only if the

“MAP/VOICE”

button is

pushed.
To turn the “Auto Voice Guidance” mode

on:

1. Push the “MENU” button.

2. Touch “Setup” on the “Menu”
screen.

Then touch

to display page 2 of the

“Setup” screen.

3. Touch “ON” of “Auto Voice Guid-
ance”.

The selected button is highlighted.

4. Touch “OK”.

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands