Toyota OM30875U Manual Download

Page: 50 / 144

DESTINATION SEARCH

1. Push the “DEST” button.

2. Touch “Intersection” on the second
page of the “Destination” screen.

3. Input the name of the two intersect-
ing streets which are located near the
destination to be set.

4. Touch the button of the desired
item.

After inputting the two intersecting streets,

the screen changes and displays the map

location of the selected destination and the

route preference. (See “Starting route

guidance” on page 59.)

If the same two streets cross at more than

one intersection, the screen changes and

displays the menu to select the city name

where the streets intersect. Select the city,

and the map location of the selected des-

tination and the route preference. (See

“Starting route guidance” on page 59.)

— Destination search by
“Intersection”

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands