Toyota OM30875U Manual Download

Page: 51 / 144

DESTINATION SEARCH

1. Push the “DEST” button.

2. Touch “Freeway Ent./Exit” on the
second page of the “Destination”
screen.

Be sure to use the complete name of the

freeway or highway, including the hyphen,

when entering the destination. Freeways

and interstates use an “I” (I

−

405). US high-

ways use the state designation before the

number (CA

−

118).

3. Select the desired freeway by touch-
ing the button.

4. Either a freeway “Entrance” or
“Exit” can be selected.

5. Touch the button of the desired en-
trance or exit name.

The screen changes and displays the map

location of the selected destination and the

route preference. (See

“Starting route

guidance” on page 59.)

“Input Name”:

An applicable list is dis-

played by touching this button and input-

ting the name.

— Destination search by
“Freeway Ent./Exit”

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands