Toyota OM30875U Manual Download

Page: 69 / 144

ROUTE GUIDANCE

A number of choices are provided on the

conditions which the system uses to deter-

mine the route to the destination.

1. Touch “Route”.

2. Touch “Route Preference” to
change the conditions that determine
the route to the destination.

3. Select the desired route preference
by touching the button.

When searching for a route, the system will

avoid routes when the indicator is off.

4. After choosing the desired route
preference, touch “OK”.

You can start the route guidance from the

adjacent road.
(ex. When route guidance is set on the

freeway, but the vehicle is driven parallel

along the freeway.)

1. Touch “Route”.

2. Touch “Start from Adjacent Road”.

When there is no adjacent road, this button

will not be displayed.

— Route preference

— Starting route from
adjacent road

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands